Our Valves for Control of Flow and Pressure

NORTH PORT VALVES – Gate Valves

Why use North Port Gate Valves?

     1.    Typical application: recycled paper digesters, lime mud, liquors, plastics, polymers, cement, powder and other slurry and abrasive services
     2.    Handwheel Non-Rise Stem or high performance cylinder actuation with a safety lockout systems.
     3.    Live Loaded Teflon packing for stem sealing & 4 posted 300 Stainless steel Topworks
     4.    Typical size from 3 inch to 42 inches
     5.    Hardened Stainless Steel Chrome plated beveled edge gate, Stainless Steel Body with SS bolts and nuts
     6.    Patented Gate Alignment guides to prevent the gate being pushed out of the seating areas
     7.    Wafer style and Flanged Check Valves 317 Stainless Steel from 2 to 24 inches

SINGER VALVES - Water distribution and Sewage Pressure Relief Valves

Why Singer Valves on water distribution and Sewage Pressure Relief

    1.    High Performance Models offered from 1/2 inch to 36 inch in size providing

    2.    Anti-cavitational Control - AC model

    3.    Pressure Reducing to constant lower distribution pressure - PR & AC

    4.    Pressure Reducing and Flow Control - PFC

    5.    Pressure Reducing with Integral Back-Up - PR-SM

    6.    Level Control - one way or two way Flow Altitude Control  A1 &  A2

            Float Modulating and Non-Modulating to balance in-flow F4 & F5

    7.    Pump Control - Booster Pump Control BPC & PG-BPC prevents surges associated with starting and stopping of pumps

    8.    Deep Well Pump Control -  DW & DWX discharges air and silt to waste and prevents surges

    9.    Pressure Control -  PR, PPR-C, PR-48 & PR-R reduces downstream pressure regardless of upstream pressure or flow. 

            An added  check valve on the PPR-C prevents reverse flow

   10.    Flow Control RF, HC, EF limits the flow to preset maximum, HC permits one way flow only and offers adjustable closing speeds,

            EF valve will shut off tightly when flow is exceeded and prevents water loss in pipe system in event of break

   11.    Relief, Sustaining, Surge Control RPS, RPS-L&H, RPS-RR, RPS-D & RPS-SC these valves are designed to relieve excess

            pressures dues to surges in a system

   12.    Sewage Pressure Relief Valve DL direct acting spring loaded relief valve, opens when inlet exceeds set point and closes drip

            tight when pressure falls below set point. 

            Electronic Control of all above functions and complete control systems pre-assemble

SCHUBERT & SALZER - Control Valves

Why use Schubert & Salzer?

  1. Angle body valves allow for installation in tight spaces and out perform solenoids by millions of cycles
  2. Wafer sliding gate design allows for easier installation and less cost, yet handles tough applications
  3. Digital positioner with the angles seat valve offers performance at lower costs
  4. Diaphragm valves from 1/4 inch to 2 1/2 inches, and sanitary control valves
  5. Self-Contained pressure regulators for sanitary and industrial steam and liquid applications

TESCOM CORP - Regulators

Why use Tescom?

  1. High accuracy pressure control with self regulating products
  2. Pressure Regulators and Back Regulators controlling from inches to 20,000 Psig
  3. ER-3000 offers control loading of the regulator to eliminate droop and provide precise downstream pressure settings in milliseconds.
  4. Manual on/off valves and tough air loaded on/off valves for high pressure & tight shut off

VALCOR SCIENTIFIC - Solenoid Valves

Why use Valcor?

  1. "Dri-Solenoid" valves eliminate the process fluid from metal parts
  2. Subminiature Teflon Solenoid valves with bubble tight shut-off
  3. High Purity Solenoid Valves for bottle filling, cell counters and protein synthesis in biotechnology
  4. High Purity Teflon Regulator outlet from 15 to 60 PSIG Cv is .018 maximum inlet 125 PSIG for pure water systems

TEAM NORGREN - Solenoid Valves, Norgren Air Preparation, KIP Solenoid Manifolds

Why consider Team Norgren?

  1. If ASCO is having a difficult time providing a solution, ask Herion -- part of the Norgren team
  2. Solenoid diaphragm valves for high flow rates up to 2 inches
  3. NAMUR valves for rotary actuators
  4. Hazardous location ratings and all NEMA types 1,3,4,4X,6,6P,7 &9
  5. Air regulators and filters for oil removal and Tank relief valve for water or compressed air

 


Home | Contact Us | About Us | Map & Directions | New Products